Description

IF THE PRODUCT IS OUT OF STOCK – SIGN UP FOR THE WAITLIST TO BE NOTIFIED WHEN IT IS AVAILABLE ON OUR WEBSITE!

6.5mm SAUM (Short Action Ultra Mag) – ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.  Designed to work with chambers cut with the .296 neck reamer.  No neck turning required!

We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

At ADG, we distribute our products direct to dealer.  This means that we do not give additional discounts to wholesalers or distributers and our distribution network is a completely home-grown group of both large and small “dealers” that are made up of store-fronts, internet sales, and custom rifle builders.  We ship the majority of our product to our dealers to support their business needs and place small amounts of remaining product on our website when it is available after a month or so of like caliber shipments to our dealers from the production floor.  When you are signed up on the waitlist, you will receive an email notification when the product is available for purchase on our website.  THANK YOU for your business!